2.85m wide Glamping Pod Frame Kit

£787.09£2,490.15

Our glamping pod frame kit is ideal for building glamping pods, home offices and garden rooms and are available in a variety of sizes and styles. This size of frame kit should ensure that once complete, it can be transported as a normal load not an abnormal load (also dependant on finish).

Description

Our 2.85m wide glamping pod frame kit is ideal for building glamping pods, home offices and garden rooms. The width of this frame kit should ensure that once complete, it can be transported as a normal load not an abnormal load (also dependant on finish).  They are available in a number of lengths and alternate styles. We manufacture all of our glamping pod frame kits from high quality 18mm structural grade plywood. All of the standard size glamping pod frame kits comprise of a cross section of 100mm allowing you to fill the cavity with insulation.  You can also utilise this void for running cabling and amenities therefore we recommend you plan your amenities and run them before skinning the pod. The arches are exceptionally sturdy because they are 36mm thick once assembled (2x 18mm) our kits are strong enough to hold the weight of a fully grown male without additional support.

Assembly:

The standard frames have an exterior height of 2550mm (to top of peak) and 2850mm width at base (internal 2350 x 2650mm). Assembling the components is easy as all components are numbered making it virtually impossible to get them wrong. We also have comprehensive instructions as well as instructional videos available. Using traditional tusk and tenon joints you join the arches rigidly together. We leave the two end walls open enabling you to build the pods to your requirements. We do not provide the wood for the end walls with the kits. A 3 dimensional model of one of our kits is available here although it may not be the same length as the current product. To construct the glamping pod frame kit you will usually need:

  • Approx 5 litres waterproof Glue (PVA or similar)
  • A nail gun and nails or a powered screwdriver and screws
  • A hammer to tap the wedges in

Other styles of pod are available here

 

Need a little more than a bare frame?

Whilst we do not provide a complete pod kit we do manufacture the fascia panels and are proud to be a stockist of Britmet lightweight roof tiles.  Kits of tiles are available to purchase online here:

Custom sizes are also available

Let us know your requirements by clicking the link below and we will get back to you with a quotation and lead time

Looking for a fully built pod?

For smaller projects we can build at our workshop in East Kilbride and Hiab the pod to your site.  For more involved or larger builds we have teamed up with a specialist company that can build everything on site for you, contact our office for more details

**delivery is included in the cost (excluding Highlands and Islands). Delivery is via a pallet wagon – you must have an area of flat, level ground for delivery – We do not provide a Hiab.

Additional information

Dimensions 1600 × 1200 × 1000 mm
Pod Length

3050mm, 3660mm, 4270mm, 4880mm, 5490mm, 6100mm, 6710mm, 7320mm, 7930mm, 8540mm, 9150mm, 9760mm, 10370mm, 10980mm

Reviews

There are no reviews yet.

Be the first to review “2.85m wide Glamping Pod Frame Kit”

Your email address will not be published. Required fields are marked *

You may also like…